High-efficiency monocrystalline solar panels engineered for Rwanda’s equatorial climate ā delivering peak generation across 5.5+ daily sun hours, dual rainy seasons, and the long high-altitude days of the Congo-Nile Divide.
Peak panel output
Performance warranty
Annual degradation
Bill reduction possible
MySolar supplies the 66HL4M-(V) series ā high-efficiency N-type monocrystalline halfcell modules using Tunnel Oxide Passivating Contacts (TOPCon) technology. These are tier-1 panels built for maximum output, minimum degradation, and decades of reliable performance in tropical conditions.
Lower light-induced degradation (LID/LeTID) and stronger low-light performance versus conventional P-type cells ā ideal for Rwanda’s cloudy mornings and afternoon overcast.
Advanced Heterojunction Optimised Technology delivers better reliability and power generation efficiency over the panel’s full 30-year life ā not just at installation.
More busbars mean better light capture, shorter current paths, and improved resistance to micro-cracks ā maintaining output even if surface damage occurs.
Potential Induced Degradation is eliminated through material optimisation ā meaning output doesn’t silently decay over time the way unprotected panels can.
Third-party certified to pass high salt spray and ammonia corrosion tests ā critical for agricultural, coastal, and high-humidity installations across Rwanda.
Certified for 5,400 Pa front static load and 2,400 Pa rear ā withstanding extreme wind and potential hail loads at Kigali’s 1,500 m elevation.
The biggest hidden cost in solar is how fast a panel loses output. MySolar’s N-type TOPCon modules degrade at just 0.4% per year ā far below industry average ā preserving your investment and your savings for decades.
~72% output retained
~72% output retained
~72% output retained
Standard panels lose 2ā3% in their first year as initial light-soaking occurs. MySolar’s anti-LID N-type chemistry holds first-year loss to just 1% ā you keep more from month one.
At Rwanda’s average peak consumption, the difference between 0.4% and 0.7% annual degradation compounds to hundreds of kilowatt-hours lost per year by year 15. MySolar preserves that energy ā and the money it represents.
MySolar PV modules are the energy source at the heart of all three integrated system series ā sized and arranged to match your load profile and roof area.
3 Kwp- 7.2 kwp
3Kw/6kw/10Kw
2.5Kwh - 10.2Kwh
3 Kwp- 7.2 kwp
12.3 kwp
12Kw
20.4kwh - 32.1KWh
3Tons - 6Tons
17.7 ā 53.1 kWp
30 / 50 kW
20.4 kwh ā 145 kWh
6 ā 36 Tonnes
As demonstrated at the Modern Poultry Project in Bugesera, MySolar PV arrays power heavy machinery ā hammer mills, feed mixers, waste crushers ā entirely off-grid at 30 kWp, eliminating diesel dependency and REG costs simultaneously.
The Urusobe Series supports industrial load profiles up to 53 kWp with 145 kWh battery backup ā reducing electricity bills by 60ā85% and delivering ROI in 4ā5 years even at high industrial energy tariffs.
All MySolar installations are backed by our local after-sales team in Kigali-Remera. Panel performance is monitored in real time through the MySolar smart app, and any warranty claim is handled directly ā without third-party delays or overseas escalation.
